Specification

Dimensions
28.75"L x 27.52"W x 20.8"H
(73cm x 69.9cm x 52.8cm)

Weight
150 lbs. (68kg)

Electrical
115 VAC, 60 cycle, 5 amps; overload protection built in;
220 VAC, 50 cycle optional

Communication Interface
RS-232-C; Centronics compatible

Air Requirements
3 cfm at 90 psi

Product Sensing
Photoelectric

Printing Methods
Direct-thermal and thermal-transfer

Print Resolution
203- or 300-dpi, dependent upon model selected

Print Area
Datamax PE42:
4.1"W x 6.0"L (104mm x 152.4mm)
Sato 8460SE:
6.0"W x 6.0"L (152.4mm x 152.4mm)
Sato 8485SE:
5.1"W x 6.0"L (129.5mm x 152.4mm)
Sato 8490SE:
4.4"W x 6.0"L (112mm x 152.4mm)
Zebra 112:
4.1"W x 6.0"L (104.0mm x 152.4mm)
Zebra 113:
4.1"W x 6.0"L (104.0mm x 152.4mm)
Zebra 172:
6.0"W x 6.0"L (152.4mm x 152.4mm)
Zebra 173:
6.0"W x 6.0"L (152.4mm x 152.4mm)

Print Speed & Resolution
Datamax PE42:
Up to 10.0" per second (254mm) @203-dpi
Sato 8460SE:
Up to 8.0" per second (203mm) @203-dpi
Sato 8485SE:
Up to 12.0" per second (305mm) @203-dpi
Sato 8490SE:
Up to 8.0" per second (203mm) @300-dpi
Zebra 112:
Up to 12.0" per second (305mm) @203-dpi
Zebra 113:
Up to 8.0" per second (203mm) @300-dpi
Zebra 172:
Up to 12.0" per second (305mm) @203-dpi
Zebra 173:
Up to 8.0" per second (203mm) @300-dpi

Label Sizes
Datamax PE42:
Max 5.0"W x 6.0"L (127mm x 152.4mm)
Min 1.0"W x 1.0"L (25.4mm x 25.4mm)
Sato 8460S:
Max 5.0"W x 6.0"L (127mm x 152.4mm)
Min 1.0"W x 1.0"L (25.4mm x 25.4mm)
Sato 8485SE:
Max 5.25"W x 6.0"L (133.3mm x 152.4mm)
Min 1.0"W x 1.0"L (25.4mm x 25.4mm)
Sato 8490SE:
Max 5.25"W x 6.0"L (133.3mm x 152.4mm)
Min 1.0"W x 1.0"L (25.4mm x 25.4mm)
Zebra 112:
Max 4.5"W x 6.0"L (114mm x 152.4mm)
Min 0.5"W x 1.0"L (13mm x 25.4mm)
Zebra 113:
Max 4.5"W x 6.0"L (114mm x 152.4mm)
Min 0.5"W x 1.0"L (13mm x 25.4mm)
Zebra 172:
Max 6.0"W x 6.0"L (152.4mm x 152.4mm)
Min 2.0"W x 1.0"L (50.8mm x 25.4mm)
Zebra 173:
Max 6.0"W x 6.0"L (152.4mm x 152.4mm)
Min 2.0"W x 1.0"L (50.8mm x 25.4mm)

Label Roll Size
Maximum diameter 12.0" (305mm)

Labeling Speed
Contingent upon label size/content

Label Placement
Accurate to ±0.03" (.76mm) when labels are produced to specifications and product handling is controlled and consistent

Labels
Die-cut, waste removed with 0.125" (3mm) minimum separation between labels in running direction and 0.125" (3mm) maximum web over label width; direct or thermal-transfer

Labeling Software
Weber Print-Apply software

Print Characters & Bar Codes
Text: Selection of fonts, including OCR-A & B representation
Bar Codes: UPC-A/E, EAN-8/13, Code 39, I 2 of 5, Code 128, Codabar, MSI, 2 of 5, Code 93, UPC Bookland, Matrix 2 of 5, Postnet, UCC/EAN 128, PDF-417, Maxicode, Data Matrix
(Text and bar codes can be rotated 360 degrees; horizontal and vertical character expansion)

Optional Features
. Adjustable Stand
. LegiLink Terminal
. Quick-change tamp pad
. Enhanced I/O
. Label-on-pad sensor
. Product presence sensor
. Product height sensor
. Secondary wipe station
. Swing Tamp